Bridging the gap between digital & offset printing

JETvarnish 3D Evo





Discover the new flagship of the JETvarnish product family, the JETvarnish 3D Evolution for B1+ format.

The JETvarnish 3D Evolution (Evo) has been specially designed to offer digital and offset printers a scalable upgrade_path for a full range of production environments and postpress applications.

The JETvarnish 3D Evo delivers high-volume productivity with up to 4,065 B2 sheets size per hour (52x74 cm/20x29’’). Its 8-up format (up to 75x120 cm/29x47’’) delivers dynamic performance for the most demanding applications in the fastest growing markets – including packaging.

The JETvarnish 3D Evo gives extra added-value and sensory dimensional textures to printed output. The 100% digital technology provides quick prototyping, short run customization flexibility and the ability to use variable data for personalizing text & graphics on every piece produced. 


UV inkjet Technology

• MGI’s exclusive inkjet engine technology
• Drop-on-Demand (Dod) inkjet application
• Piezoelectric print heads in single pass printing
• Flexible & scalable architecture

Coating Thicknesses

Depending on your file and the substrate used, the
coating thickness can vary from a traditional flat spot
UV coating of 3 microns (µm) up to 200 µm for 3D
raised texture effects and a tactile finish.

Production Speed

Up to 3,000(1) B2 sheets size per hour for all versions.
When printable width is enabled to 75cm/29’’
print speed can reach up to 4,065(2) B2 sheets per
hour with a landscape rotation of the sheet.

(1) speed will vary according to printing parameter used.
(2) with the 75cm/ 29’’ Evo kit.


Left & right motorized registration side guides.
Automatic registration using a built-in scanner for
real-time management of entire sheet. No registration
marks required.


(width x length)
Min: 21x30 cm / 8x11.8’’
Max: 52x120 cm / 20x47’’ (standard configuration)
64x120 cm / 25x47’’ (as an option)
75x120 cm / 29x47’’ (as an option)

Paper Thickness

Motorized inkjet head height-adjustment
Min: 135 gsm and not less than 150 µm / 6 mil
before printing & lamination.
Max: 600 gsm and not more than 600 µm / 24 mil
before printing & lamination.


Enhancement on most(4) matte or glossy laminated
surfaces, with or without aqueous coating, layered
paper, plastic, PVC and other coated materials.
Spot 3D coat directly onto most(4) digital prints
(ie. MGI Meteor).

(4) confirm substrate/toner/metallic film compatibility with MGI.

Printing Width

51 cm / 20’’ (standard)
63 cm / 24.8’’ (as an option)
74 cm / 29’’ (as on option)

Coating and Special Inks

Several coating formulas available, one dedicated
to 2D (flat coat) and the other for 2D/3D usage.
The JETvarnish 3D Evo comes standard with 2
coating tanks and 2 coating circuits allowing a quick
changeover between coatings. Two tanks have a high
capacity volume (18 liters / 4.7 US gal.).
“On-the-fly” tank changeover possible during
production without any interruption and no waste.

Standard Feeder & Stacker

75 cm Sheet-fed Feeder
High capacity feeder able to pile up paper up to
60 cm / 23.6” high for 75x120 cm (29x47’’) sheets.
Approximately 4,000 sheets at 135 gsm.

75 cm Pallet Stacker
Support sheets up to size 75x120cm (29x47’’) on
pallet packaging.

iFOIL (Hot Foiling)

Optional Digital Hot Foiling module application
Standard sheet format is 75x120 cm (29x47’’)

• Production Speed
Up to 1,200 B2 sheets size per hour (or up to
25 m per minute - 65.6ft per minute).

• Films
Uses a variety(6) of hot foils available on the market.
Optimization system of film consumption.

• Film Rolls
Max. roll diameter and length : ± 30 cm/11.8’’ and
from 400 to 2,000 meters of film (1,300 to 6,500 ft).
Up to 5 simultaneous film rolls on the same axis (with
a minimum of 10 cm/3.9’’ per roll)
2 cores available : 1 inch as standard and 3 inches
as option.

• Maximum Surface
Hot foil substrate surface can not exceed
74x119 cm (29.1x46.8’’).

• Embossing
Thickness from 18 up to 200 ?m.
The surface of the metallized film may be covered
with a layer of varnish or another foil.

• Dry Air
Requires air without oil at 6 bar (87 psi) & 24 m3/h.
(14 cfm) supply.

Other Options

• 64 cm Evo Kit for Upgrade Enhancement
Option or later update for printing up to
64x120 cm / 25x47’’ sheet size.

• 75 cm Evo Kit for Upgrade Enhancement
Option or later update for printing up to
75x120 cm / 29x47’’ sheet size.

• Variable Data Enhancement (VDE)(7)
Optical “on-the-fly” variable data system uses
camera and preprinted barcodes. Variable data
for text, graphic and image on both 2D/3D Spot
Coating and Hot Foiling areas.

(7) available mid-2016

Dimensions (L x W x H) & Weight

11.10 x 1.96 x 1.83 meter
36.4 x 6.4 x 6.0 ft
Necessary clearance : 1 meter (3.3ft) on 3 sides
and 2 meters (6.6ft) on the stacker side.

± 5,000 kg / 11,023 lbs

Operating Environment

JETvarnish 3D Evo + iFOIL L
40 kW (63 A) at 400 Volts - 50/60 Hz
20 kW (32 A) at 400 Volts - 50/60 Hz

Temperature : 18 à 30°C / 64 to 86°F
Relative humidity between 30 and 50%
(no condensation)

Eco Friendly

• Eliminates resource waste (wasted electricity, paper and varnish)
• No plates (offset) or screens (screen printing)
• No messy cleanup or preparation between jobs
• Drastic reduction in amount of consumables and use of bulk packaging
• Coating without solvent


Price on application, please call us on +44 (0)1442 446446

Request a sample pack